Solution

Hello,everyone.Welcome to stay tuned to the SPT Laser. The current setting of laser tube in laser machining is introduced today. ... [Detail]

2022-09-29

CO₂ laser tube is one of the parts that needs to be replaced after certain time, it can be half a year to 3 years. In general situations, CO₂ laser tubes’service life is about a year and a half .Due to various irregular operating habits and incorrect use, the CO ₂ laser tube’s "premature death" is not rare. This will undoubtedly have an impact on the production of thecompany and increase the cost. ... [Detail]

2021-06-24

Recently, the weather is getting hotter and the average temperature is about to exceed 34°C. With intermittent rain, the humidity in the air also has been greatly increased. This environment is undoubtedly fatal to laser equipment that requires water cooling during operation.In hot and humid environment, it is easy to cause condensation inside the laser equipment during the operation, the performance of the laser tube or the RF laser may be affected,and even serious damage may be caused. ... [Detail]

2021-05-05

Heating generated from laser can absorb dirtto contaminate the surface of optical lens. Dust, oil vapour, water vapour, splashing of materials during cutting and engraving, fingerprints and so on can also contaminate the optical lens. It will decrease the transmittance of laser lens, cause laser process power drop and lens damage. ... [Detail]

2020-04-24

We often found these situations that laser tube may appear under power or no light,lifetime short,laser tube occur unrepairable damage etc. In the daily processing of laser engraving and cutting, most of the reasons is that the daily maintenance of the laser tube is not enough.Let’s talk about the working condition of laser tube and operating common problems analysis and solution. ... [Detail]

2018-04-10

In winter, the air temperature is close to 0℃ in many areas all over the world. If the ambient temperature is too low, it may result in water freezing inside the co2 glass laser tube and water chiller, end up with laser tube broken and damages to chiller. If you can’t remember to dry the laser tube and chiller every time when you shut down the machine, you may need some solution for anti freezing of coolant. ... [Detail]

2017-06-29