Solution

A carbon dioxide laser (CO2 laser) is a gas laser that uses CO2 gas as working substance. The discharge tube is usually made of glass or quartz material filled with CO2 gas and other auxiliary gases (mainly helium and nitrogen, usually with a small amount of hydrogen or helium); the electrode is generally a hollow cylinder made of nickel; One end is a gold-plated total reflection mirror and the other end is a partial mirror milled with tantalum or gallium arsenide. ... [Detail]

2018-09-13

The basic structure of a typical sealed off CO2 laser tube is shown in the above figure. It consists of three parts: hard glass, resonant cavity and electrode. ... [Detail]

2018-08-21

We often found these situations that laser tube may appear under power or no light,lifetime short,laser tube occur unrepairable damage etc. In the daily processing of laser engraving and cutting, most of the reasons is that the daily maintenance of the laser tube is not enough.Let’s talk about the working condition of laser tube and operating common problems analysis and solution. ... [Detail]

2018-04-10

check the laser mirror and focus lens whether it is dirty. If it is dirty, please immediately clean it with alcohol; ... [Detail]

2017-07-27

The reasons of laser tube not fire as follows:1.laser tube damage or laser controller damage,not turning on laser machine for a long time. ... [Detail]

2017-07-21

In winter, the air temperature is close to 0℃ in many areas all over the world. If the ambient temperature is too low, it may result in water freezing inside the co2 glass laser tube and water chiller, end up with laser tube broken and damages to chiller. If you can’t remember to dry the laser tube and chiller every time when you shut down the machine, you may need some solution for anti freezing of coolant. ... [Detail]

2017-06-29