Solution

Supporting point Support points must be accurate. Place the laser tube according to the support label attached to the laser tube by the manufacturer. ... [Detail]

2019-08-07

The CO2 laser produced by SPT laser has good resistance. The power attenuation is less than 10% within 10,000 hours. The structure is stable. There are tens of thousands of terminal laser processing customers in the world. For example, the laser tube encounters the following problems, follow the steps in this article to troubleshoot. ... [Detail]

2019-06-12

SPT Laser invites you to spend some time reading the laser tube safety instructions, including precautions and safety reminders during the use of this type of laser tube, and detailed information such as installation and warranty. This manual consists of laser tube information, installation and use, warranty terms, etc. Please keep it carefully and check it out at any time. ... [Detail]

2019-05-24

The laser cutting machine itself uses a flying optical path system. During long-term work, the optical path will slightly deviate, which will have a great impact on the cutting effect. Therefore, regular inspection of the light path and adjustment is a very necessary task. Before adjusting the optical path of the laser cutting machine, we must have enough knowledge of the laser tube, the mirror frame and the focus lens. Let’s introduce it to you. ... [Detail]

2019-03-29

When use, turn on the cooling water first so that the water flow circulates in the laser tube according to the principle that the cooling water inlet must follow from the positive to negative end of laser tube. Adjust the outlet tube position to ensure that it is full filled with the cooling water and there is no bubble in the tube, and then turn on the power supply. ... [Detail]

2019-03-21

CO2 RF metal lasers are one of the fastest growing technologies in the industrial laser market in recent years and are considered to be the best alternative to glass tube sealed CO2 lasers. ... [Detail]

2018-10-23